Master Course on Steel Building Design (Intermediate) Course Outline
Class-1: Basic Concepts on Steel Structure & Definitions
• Staad pro connect edition update software installation procedure, software link.
• Preliminary concept about building codes (BNBC, AISC, AISI, MBMA, ASCE etc.)
• Basic of Structural Design
• Basic of Steel structure
• Steel building components
• Definitions,
• Preliminary concepts on Structural Framing Systems
• Occupancy Category
• Staad pro connect edition update software installation procedure, software link.
• Preliminary concept about building codes (BNBC, AISC, AISI, MBMA, ASCE etc.)
• Basic of Structural Design
• Basic of Steel structure
• Steel building components
• Definitions,
• Preliminary concepts on Structural Framing Systems
• Occupancy Category
Class-2: General Requirements of Structural Design & Dead load & Live load as per BNBC-2020
• Serviceability
• Drift Calculations
• Serviceability
• Drift Calculations
• Terminology,
• Dead Load calculation,
• Live Load, Reduction of Live loads.
• Exposure conditions, Surface Roughness
• Dead Load calculation,
• Live Load, Reduction of Live loads.
• Exposure conditions, Surface Roughness
Class-3: Wind Load Calculations as per BNBC-2020 – 01
• Wind Load Calculations (Partially Enclosed, Fully Enclosed buildings) for mono slope roof,
pitched roof, Flat roof,
• Wind Load Calculations for low rise & all heights buildings
• Wind Load Calculations (Partially Enclosed, Fully Enclosed buildings) for mono slope roof,
pitched roof, Flat roof,
• Wind Load Calculations for low rise & all heights buildings
Class-4: Wind Load Calculations as per BNBC-2020 -02
• Wind Load Calculations for Open bldg. for mono slope roof, pitched roof, Flat roof
• Wind Load Calculations for Arched Roof
• Wind Load Calculations for Open bldg. for mono slope roof, pitched roof, Flat roof
• Wind Load Calculations for Arched Roof
Class-5: Seismic Load Calculations & Load Combinations as per BNBC-2020
• Soil Classifications as per SPT
• Seismic Design Category
• Design Base Shear calculations by equivalent static analysis
• Soil Classifications as per SPT
• Seismic Design Category
• Design Base Shear calculations by equivalent static analysis
Class-6: Seismic Load Calculations & Load Combinations as per BNBC-2020
• Vertical effects of Seismic load
• Overstrength factor Effect
• Irregularity brief discussion.
• Vertical effects of Seismic load
• Overstrength factor Effect
• Irregularity brief discussion.
Class-7: Design of a Single story shed using Staadpro-01
• Load Combinations
• Basic layout of Staad Pro and its Application
• Orientation of steel column
• Load Combinations
• Basic layout of Staad Pro and its Application
• Orientation of steel column
• Plane and Space Frame Analysis
• Modeling the 2D and 3D Frame
• Orientation to Staad Editor
• Tapered section is used in steel structure, why?
• Use of various kinds of support system
• Assigning the different kind of supports
• Hairpin effects on Staad model.
• Assigning the steel section sizes with respect to the design requirements
• Creating the different kinds of load cases for Gravity and Lateral (Wind, Seismic)
• Assigning the different kinds of Gravity loads
• Modeling the 2D and 3D Frame
• Orientation to Staad Editor
• Tapered section is used in steel structure, why?
• Use of various kinds of support system
• Assigning the different kind of supports
• Hairpin effects on Staad model.
• Assigning the steel section sizes with respect to the design requirements
• Creating the different kinds of load cases for Gravity and Lateral (Wind, Seismic)
• Assigning the different kinds of Gravity loads
Class-8: Design of a Single story shed using Staadpro-02
• Application of Wind force (Pressure & Suction force)
• Wind load application on multi-gable & arch type shed, flat roof, arched roof.
• Application of Seismic force in 2 or 3 ways
• Creating load combination as per BNBC 2020 code
• Application of Wind force (Pressure & Suction force)
• Wind load application on multi-gable & arch type shed, flat roof, arched roof.
• Application of Seismic force in 2 or 3 ways
• Creating load combination as per BNBC 2020 code
Class-9: Design of a Single story shed using Staadpro-03
• Tension member, Truss member & Moment Release of beams
• Post Column Design
• Bracing & Sturt member applications
• Design parameters (CB, FYLD, Lx, Ly, Lz, MAIN, STIFF, TMAIN, UNB, UNT etc.) prior to run the
analysis.
• Warning & error solution in model by STAAD Editor.
• Tension member, Truss member & Moment Release of beams
• Post Column Design
• Bracing & Sturt member applications
• Design parameters (CB, FYLD, Lx, Ly, Lz, MAIN, STIFF, TMAIN, UNB, UNT etc.) prior to run the
analysis.
• Warning & error solution in model by STAAD Editor.
Class-10: Design of a Single story shed using Staadpro-04
• Comparing the Actual program Drift Vs. Code provisions
• Checking deflections for gravity and lateral load as per BNBC
• Comparing the Actual program Drift Vs. Code provisions
• Checking deflections for gravity and lateral load as per BNBC
• Analysis & Design of member. Manual calculation of tension members, compression members,
• Design of roof purlin and side girt using excel.
• Design of roof purlin and side girt using excel.
Class-11: Crane Load Application through Staad model
• Crane load manual calculation & design procedure by staad model
• Drift calculate & check for crane load
• Crane load manual calculation & design procedure by staad model
• Drift calculate & check for crane load
Class-12: Design of a Multi-storied building with Shed – 01
• Modelling of Six Storied building with Stair
• Geometry assign
• Design Parameter Assign
• Load Assign
• Modelling of Six Storied building with Stair
• Geometry assign
• Design Parameter Assign
• Load Assign
Class-13: Design of a Six-storied building with Shed – 02
• Run Analysis & Design
• Sway Check,
• Base Reaction, Axial force, moment output
• Run Analysis & Design
• Sway Check,
• Base Reaction, Axial force, moment output
Class-14: Design of Base plate & Anchor bolt by Ram Connection
• Base plate, Anchor bolt design by Ram Connection for fixed base and pinned base (With some
manual calculations)
• Shear lug design calculations by manual & software
• Base plate, Anchor bolt design by Ram Connection for fixed base and pinned base (With some
manual calculations)
• Shear lug design calculations by manual & software
Class-15: Design of Moment connections by Ram Connection
• Design of moment connection by RAM connection (Main beam to column, Rafter to column,
Rafter to Rafter, Column to column etc.)
• SMF & IMF Connection on RAM & some brief about seismic detailing
• Design of moment connection by RAM connection (Main beam to column, Rafter to column,
Rafter to Rafter, Column to column etc.)
• SMF & IMF Connection on RAM & some brief about seismic detailing
Class-16: Splice connections, Sturt member connections, Bracing connections, Shear
Connections by Ram Connection
• Splice connection, Sturt member connection, Bracing Connection, Joist Connection, Post
column connections by RAM with some manual calculations.
Connections by Ram Connection
• Splice connection, Sturt member connection, Bracing Connection, Joist Connection, Post
column connections by RAM with some manual calculations.
[N.B.: All lecture sheet, documents & sufficient drawing will be provided except soft copy of
excel sheet. If anyone miss any class, then he/she will get chance to do that class with the next
batch]
excel sheet. If anyone miss any class, then he/she will get chance to do that class with the next
batch]
Class-17: Assignment & Solve
Curriculum
- 19 Sections
- 18 Lessons
- 52 Weeks
Expand all sectionsCollapse all sections
- Day 11
- Day 21
- Day 31
- Day 41
- Day 51
- Day 61
- Day 71
- Day 81
- Day 91
- Day 10 Flexure Member1
- Day 11 Deck Slab, Crane Load, Purlin1
- Day 12 Seismic Behavior of Steel1
- Day 131
- Day 141
- Day 151
- Day 160
- Day 161
- Day 171
- Day 181
We have the best mentor. Lifetime Support. True to our values. High-Quality care etc.
2 month
Yes, each class will be recorded. And students will be given access to recorded videos.
Yes, You Can. Our Professional Steel Building Design Course has an installment system. 50% at the time of registration, then 50% at the middle of the class.
Class Sheet, Certificate.
You can ask questions in the WhatsApp group.
Requirements
- BSc. In Civil Engineering
Features
- দুই মাস ব্যাপী বিস্তারিত আলোচনা।
- ম্যানুয়াল ক্যালকুলেশনের মাধ্যমে সফটওয়্যারের ক্লাস নেয়া হয়।
- ক্লাস শেষে ভিডিও দেখার সুযোগ।
Target audiences
- Interested in joining the steel industry
Subject: Request for Access to Course Materials
Dear Sir/Madam,
My name is Maruful Hasan Mazumder, an ongoing candidate (Online 3C Candidate) enrolled in the Master Course on Steel Building Design (Order ID #0000009617). My course access is set to expire this month.
I noticed that the video lectures were conducted in December 2023, whereas I enrolled later in October 2024. As such, I would like to download essential course materials, including:
• PDF lecture notes and supplementary class materials,
• Download links for the software/s (e.g., that were provided during Lecture 2),
• Necessary Excel files (e.g., containing seismic design provisions/examples),
• STAAD.Pro files (e.g., *8. Pitched Roof + Fascia*, etc.),
• Sample design reports (e.g., *IMEL-2023-08*, etc.).
• and other necessary documents relevant to the course.
Given the impending expiration of my access, I kindly request your assistance in providing these materials at your earliest convenience. I would greatly appreciate your support.
Thank you for your time and consideration.
Best regards,
Maruful Hasan Mazumder
maruf320@gmail.com
Order ID: #0000009617
Thank you for providing me access to see the class video. (As requested in my previous comment) May I get relevant lecture materials (some copy of lecture sheets, relevant excel, book copies, sample Staadpro files) that was shared in the WhatsApp group during online live lectures of the Master Course on Steel Building Design.
Want to admit