Master Course on Steel Building Design (Intermediate) Course Outline
Class-1: Basic Concepts on Steel Structure & Definitions
• Staad pro connect edition update software installation procedure, software link.
• Preliminary concept about building codes (BNBC, AISC, AISI, MBMA, ASCE etc.)
• Basic of Structural Design
• Basic of Steel structure
• Steel building components
• Definitions,
• Preliminary concepts on Structural Framing Systems
• Occupancy Category
• Staad pro connect edition update software installation procedure, software link.
• Preliminary concept about building codes (BNBC, AISC, AISI, MBMA, ASCE etc.)
• Basic of Structural Design
• Basic of Steel structure
• Steel building components
• Definitions,
• Preliminary concepts on Structural Framing Systems
• Occupancy Category
Class-2: General Requirements of Structural Design & Dead load & Live load as per BNBC-2020
• Serviceability
• Drift Calculations
• Serviceability
• Drift Calculations
• Terminology,
• Dead Load calculation,
• Live Load, Reduction of Live loads.
• Exposure conditions, Surface Roughness
• Dead Load calculation,
• Live Load, Reduction of Live loads.
• Exposure conditions, Surface Roughness
Class-3: Wind Load Calculations as per BNBC-2020 – 01
• Wind Load Calculations (Partially Enclosed, Fully Enclosed buildings) for mono slope roof,
pitched roof, Flat roof,
• Wind Load Calculations for low rise & all heights buildings
• Wind Load Calculations (Partially Enclosed, Fully Enclosed buildings) for mono slope roof,
pitched roof, Flat roof,
• Wind Load Calculations for low rise & all heights buildings
Class-4: Wind Load Calculations as per BNBC-2020 -02
• Wind Load Calculations for Open bldg. for mono slope roof, pitched roof, Flat roof
• Wind Load Calculations for Arched Roof
• Wind Load Calculations for Open bldg. for mono slope roof, pitched roof, Flat roof
• Wind Load Calculations for Arched Roof
Class-5: Seismic Load Calculations & Load Combinations as per BNBC-2020
• Soil Classifications as per SPT
• Seismic Design Category
• Design Base Shear calculations by equivalent static analysis
• Soil Classifications as per SPT
• Seismic Design Category
• Design Base Shear calculations by equivalent static analysis
Class-6: Seismic Load Calculations & Load Combinations as per BNBC-2020
• Vertical effects of Seismic load
• Overstrength factor Effect
• Irregularity brief discussion.
• Vertical effects of Seismic load
• Overstrength factor Effect
• Irregularity brief discussion.
Class-7: Design of a Single story shed using Staadpro-01
• Load Combinations
• Basic layout of Staad Pro and its Application
• Orientation of steel column
• Load Combinations
• Basic layout of Staad Pro and its Application
• Orientation of steel column
• Plane and Space Frame Analysis
• Modeling the 2D and 3D Frame
• Orientation to Staad Editor
• Tapered section is used in steel structure, why?
• Use of various kinds of support system
• Assigning the different kind of supports
• Hairpin effects on Staad model.
• Assigning the steel section sizes with respect to the design requirements
• Creating the different kinds of load cases for Gravity and Lateral (Wind, Seismic)
• Assigning the different kinds of Gravity loads
• Modeling the 2D and 3D Frame
• Orientation to Staad Editor
• Tapered section is used in steel structure, why?
• Use of various kinds of support system
• Assigning the different kind of supports
• Hairpin effects on Staad model.
• Assigning the steel section sizes with respect to the design requirements
• Creating the different kinds of load cases for Gravity and Lateral (Wind, Seismic)
• Assigning the different kinds of Gravity loads
Class-8: Design of a Single story shed using Staadpro-02
• Application of Wind force (Pressure & Suction force)
• Wind load application on multi-gable & arch type shed, flat roof, arched roof.
• Application of Seismic force in 2 or 3 ways
• Creating load combination as per BNBC 2020 code
• Application of Wind force (Pressure & Suction force)
• Wind load application on multi-gable & arch type shed, flat roof, arched roof.
• Application of Seismic force in 2 or 3 ways
• Creating load combination as per BNBC 2020 code
Class-9: Design of a Single story shed using Staadpro-03
• Tension member, Truss member & Moment Release of beams
• Post Column Design
• Bracing & Sturt member applications
• Design parameters (CB, FYLD, Lx, Ly, Lz, MAIN, STIFF, TMAIN, UNB, UNT etc.) prior to run the
analysis.
• Warning & error solution in model by STAAD Editor.
• Tension member, Truss member & Moment Release of beams
• Post Column Design
• Bracing & Sturt member applications
• Design parameters (CB, FYLD, Lx, Ly, Lz, MAIN, STIFF, TMAIN, UNB, UNT etc.) prior to run the
analysis.
• Warning & error solution in model by STAAD Editor.
Class-10: Design of a Single story shed using Staadpro-04
• Comparing the Actual program Drift Vs. Code provisions
• Checking deflections for gravity and lateral load as per BNBC
• Comparing the Actual program Drift Vs. Code provisions
• Checking deflections for gravity and lateral load as per BNBC
• Analysis & Design of member. Manual calculation of tension members, compression members,
• Design of roof purlin and side girt using excel.
• Design of roof purlin and side girt using excel.
Class-11: Crane Load Application through Staad model
• Crane load manual calculation & design procedure by staad model
• Drift calculate & check for crane load
• Crane load manual calculation & design procedure by staad model
• Drift calculate & check for crane load
Class-12: Design of a Multi-storied building with Shed – 01
• Modelling of Six Storied building with Stair
• Geometry assign
• Design Parameter Assign
• Load Assign
• Modelling of Six Storied building with Stair
• Geometry assign
• Design Parameter Assign
• Load Assign
Class-13: Design of a Six-storied building with Shed – 02
• Run Analysis & Design
• Sway Check,
• Base Reaction, Axial force, moment output
• Run Analysis & Design
• Sway Check,
• Base Reaction, Axial force, moment output
Class-14: Design of Base plate & Anchor bolt by Ram Connection
• Base plate, Anchor bolt design by Ram Connection for fixed base and pinned base (With some
manual calculations)
• Shear lug design calculations by manual & software
• Base plate, Anchor bolt design by Ram Connection for fixed base and pinned base (With some
manual calculations)
• Shear lug design calculations by manual & software
Class-15: Design of Moment connections by Ram Connection
• Design of moment connection by RAM connection (Main beam to column, Rafter to column,
Rafter to Rafter, Column to column etc.)
• SMF & IMF Connection on RAM & some brief about seismic detailing
• Design of moment connection by RAM connection (Main beam to column, Rafter to column,
Rafter to Rafter, Column to column etc.)
• SMF & IMF Connection on RAM & some brief about seismic detailing
Class-16: Splice connections, Sturt member connections, Bracing connections, Shear
Connections by Ram Connection
• Splice connection, Sturt member connection, Bracing Connection, Joist Connection, Post
column connections by RAM with some manual calculations.
Connections by Ram Connection
• Splice connection, Sturt member connection, Bracing Connection, Joist Connection, Post
column connections by RAM with some manual calculations.
[N.B.: All lecture sheet, documents & sufficient drawing will be provided except soft copy of
excel sheet. If anyone miss any class, then he/she will get chance to do that class with the next
batch]
excel sheet. If anyone miss any class, then he/she will get chance to do that class with the next
batch]
Class-17: Assignment & Solve
We have the best mentor. Lifetime Support. True to our values. High-Quality care etc.
2 month
Yes, each class will be recorded. And students will be given access to recorded videos.
Yes, You Can. Our Professional Steel Building Design Course has an installment system. 50% at the time of registration, then 50% at the middle of the class.
Class Sheet, Certificate.
You can ask questions in the WhatsApp group.
Requirements
- BSc. In Civil Engineering
Features
- দুই মাস ব্যাপী বিস্তারিত আলোচনা।
- ম্যানুয়াল ক্যালকুলেশনের মাধ্যমে সফটওয়্যারের ক্লাস নেয়া হয়।
- ক্লাস শেষে ভিডিও দেখার সুযোগ।
Target audiences
- Interested in joining the steel industry